automobileInspection tool accessoriesAs a special type of inspection tool, it requires dedicated personnel to operate. Under the specified environment of temperature, humidity, etc. that meets the requirements, the inspection site should be operated according to the steps specified in the inspection tool manual. The inspection tool needs regular maintenance, mainly including lubrication of positioning holes and pins, rust prevention of internal and external functional surfaces, and dust removal of mold bottom plates. Similar measuring instruments and inspection tools also require regular calibration and identification by the metrology department. So, what is the design, manufacturing, and use of automotive inspection tool accessories?

To avoid the idea of not using inspection tools for heavy parts and correct the idea of not using inspection tools for manufacturing inspection tools. If one has already invested financial and material resources in equipping inspection tools, but is later locked in a bedroom or dusty corner, unused or improperly used, or if someone can operate them correctly but cannot apply them in daily production, then the proper role of measuring and evaluating automotive inspection tool accessories cannot be played correctly, which goes against the original intention of developing inspection tools. In short, it is necessary to equip the measuring tools with qualified ones and use them correctly. In the production of parts, inspection tools should be used regularly to test and evaluate the parts, and relevant records should be kept every time to strictly and meticulously control product quality.

Precautions before using automotive inspection tools and accessories:

1. Check if the certificate label of the inspection tool is within the validity period of the calibration.

2. Check if the working contour of the fixture is damaged.

3. Whether the positioning device is malfunctioning and whether the guiding part is worn or incomplete.

4. Whether the clamping device is intact.

5. Check if the clamping device is loose.

6. Check if the bolts are complete.

7. Whether the logo is clear and complete.

8. The inspection tools must be kept clean, especially the measuring reference and moving parts must not have iron filings or other impurities.

After self inspection, it must meet the usage requirements before it can be put into use. Otherwise, it cannot be put into use. Precautions for using automotive inspection tool accessories:

1. The parts of the inspection tool that require direct manual operation during use must be handled with care to avoid collision.

2. The bottom plate cannot be used as a place to place parts, especially sheet metal inspection tools. In use, users often mistake the motherboard for the desktop.

3. Cutting tools, knives, and other tools should not be stacked on the fixture to avoid damaging the surface of the fixture.

4. As measuring equipment, gauges cannot replace other tools.

5. Check for any abnormal phenomena, such as uneven surfaces, burrs, bending deformations, etc. Do not repair on your own, and do not hammer, file, or sand with sandpaper.

6. When measuring workpieces, do not apply excessive force or forcefully operate, as this may cause damage to the fixture.

7. The inspection tool parts must be complete, and unrelated personnel are not allowed to disassemble the inspection tool parts at will. Any problems found during inspection should be reported in a timely manner.